Simulation of the Temperature Distribution in NC-Milled Workpieces

Surmann, T.1, a; Ungemach, E.1, b; Zabel, A.1, c; Joliet, R.1, d; Schröder, A.2, e

1)
Institut für Spanende Fertigung, Technische Universität Dortmund, Baroper Str. 303, 44227 Dortmund
2)
Humboldt-Universität zu Berlin, Lehrstuhl für Mathematik, Rudower Chaussee 25, 12489 Berlin

a) surmann@isf.de; b) ungemach@isf.de; c) zabel@isf.de; d) joliet@isf.de; e) andreas.schroeder@mathematik.hu-berlin.de

Kurzfassung

In most cases the simulation of temperature distributions in machined workpieces is carried out by moving a heat source along a predefined workpiece model within a commercial FEM-system. For performance reasons, the material removal is often neglected or performed by removing small predefined parts of the workpiece. Furthermore, the heat source often has a constant heat flux and therefore it is not dependent on the current tool engagement.

In this paper we present a voxel-based finite difference method for the thermal behavior of the process-state dependent workpiece, which is integrated into the milling simulation system NCChip, developed at the ISF. This simulation is capable of modeling the cutting forces along any arbitrary NC-path. Since the tool rotation and the cutting edges in this time domain simulation are divided into discrete angle steps and cutting wedges respectively, the thermal energy that is applied to the workpiece at each time step and at each cutting wedge can be computed as a fraction of the corresponding cutting work. In this way, the correct heat is introduced to the workpiece exactly at the current contact zone of the tool.

Schlüsselwörter

Milling, Temperature, Simulation

Veröffentlichung

In: Proceedings of the 13th CIRP Conference on Modelling of Machining Operations, 2011, Sintra, Portugal, J.C. Outeiro (Hrsg.), ISBN 978-3-03785-095-4, S. 222-230